Standard Specification |
|
Model |
Floor / Table top type |
Temperature range |
-80°C / -40°C /, -20°C to Ambient |
Temperature control |
+ 0.1°C / + 0.01°C |
Temperature Uniformity |
Better than + 0.05°C |
Ambient Temp. Recommendation |
< 30.0°C |
Display Resolution & Control Sensitivity |
0.1°C |
Control Readout |
Actual and Set point |
Controller |
Digital Microprocessor based PID |
Sensor |
Pt 100 (RTD)- 3 wire |
Stirrer |
To Maintain temperature uniformity |
Drain |
Facility to drain liquid |
High temperature cut off |
2.0°C |
Heating |
Stainless steel Immersion heater with proper cold zone to control set point |
Alarm type |
Deviation High or Low |
Inner tank |
Stainless steel 304 grade dully polished |
Outer |
Mild steel CRCA sheet with powder coating |
Lid |
Provided with sensor probe inserting port holes, thermometer insert hole, |
Cooling up to -40°C |
CFC free single stage refrigeration system |
Cooling below -40°C |
CFC free double stage(Cascade) refrigeration system |
Compressor |
Hermetically sealed Emerson / Danfoss make |
Condensor |
Fin and Tube air cooled |
Refrigerant |
R134a / R404a / R 508b |
Insulation |
PUF / Foam |
Wheels |
For easy moving for floor models |
Power supply |
Single Phase – 230VAC, 50Hz |
Optional features |
|
Voltage stabilizer |
For refrigeration system |
Glass Thermometer |
Calibrated |
NABL Certified Calibration Certificate |
For temperature controller |
Data Logging |
PC interface through RS232 Communication module |
Temperature controller |
with 0.01°C display resolution |
