Standard Specification |
|
Model |
Table top type |
Temperature range |
5°C above Ambient to 100°C / 150°C / 250°C |
Temperature control |
+ 0.1°C / 0.01°C |
Temperature Uniformity |
Better than + 1°C |
Ambient Temp. Recommendation |
Ambient |
Display Resolution & Control Sensitivity |
0.1°C / 0.01°C up to 99.99°C thereafter 0.1°C |
Control Readout |
Actual and Set point |
Controller |
Digital Microprocessor based PID |
Sensor |
Pt 100 (RTD)- 3 wire |
Stirrer |
To Maintain temperature uniformity |
High temperature cut off |
2.0°C |
Boost heater cut off |
2.0°C |
Drain |
Facility to drain liquid |
Heating |
Stainless steel Immersion heater with proper cold zone to control set point |
Alarm type |
Deviation High or Low |
Inner tank |
Stainless steel 304 grade dully polished |
Outer |
Mild steel CRCA sheet with powder coating |
Lid |
Provided with sensor inserting port holes, thermometer insert hole, |
Boost heater |
For additional heat |
Liquid to be use |
OIL -Flash point higher than operating temperature |
Power supply |
Single Phase – 230VAC, 50Hz |
Optional features |
|
Cooling coil |
For chilled water circulation |
Glass Thermometer |
Calibrated |
NABL Certified Calibration Certificate |
For temperature controller |
Data Logging |
PC interface through RS232 Communication module |
Temperature controller |
with 0.01°C display resolution |