| Dry Block Calibrators |
Dry block calibrator are widely used in Calibration labs, Pharmaceutical divisions, Thermal plants, metallurgical plants, cement plants, Fertilizers divisions, etc.
STANDARD MODELS
Model no. |
TEMP. RANGE |
Temp. accuracy |
Temp. Stability |
SGS-26 DB01 |
-25°C TO 100°c |
+/- 0.2°C |
0.1°C |
SGS-26 DB02 |
200°C TO 1200°c |
+/- 5°C |
1°C |
Standard Specification |
DB01 |
DB02 |
Model |
Portable |
Portable |
Temperature range |
-25°C to +100°c |
200°C to 1200°C |
Temperature control accuracy |
+ 0.2°C |
+ 5°C |
Ambient Temp. Recommendation |
< 30°C |
Ambient |
Display Resolution & Control Sensitivity |
0.1°C |
1°C |
Control Readout |
Actual and Set point |
Controller |
Digital Microprocessor based PID |
Sensor |
PT 100 (RTD) |
N –type thermocouple |
safety cut off |
- |
For heater Whenever sensor fails |
Heater wattage |
- |
1750W |
Heating Block |
- |
|
Material |
- |
Ceramic tube |
Insulation |
PUF |
Ceramic blanket |
Outer dimension |
22mm diameter x 120mm |
140 x 140 x 300mm |
Bore dimension |
|
36mm diameter x 120mm (D) |
Standard Insert |
|
|
Insert dimension |
21.6mm diameter x 120mm |
35mm diameter x 120mm (D) |
Insert material |
Aluminum |
Stainless Steel 316 grade |
No. of Bores in Insert |
4 |
6 |
Bore dimension |
3.5mm, 5mm, 6.5mm, 8.5mm |
3.5mm, 5mm, 6.5mm, 8.5mm, 10.5mm, 13mm |
Heating and Cooling |
By Thermo Electric Coolers |
N.A. |
Cooling time |
15 min (From ambient to -25°C) |
- |
Heating time |
10 min for 100°C |
- |
Power supply |
Single Phase – 230VAC, 50Hz |
Single Phase – 230VAC, 50Hz |
Power Consumption |
250W |
1800W |
Optional features |
|
|
Temperature controller |
0.01 display resolution |
- |
Calibration Certificate |
NABL certified |
NABL certified |
|
| Note: For continuous development the above technical specification & design, SGS reserves rights to change without any prior notice. |
 |
|
|
